Lilly Friedman
The Weston Bow Scale is a simple and effective tool for measuring the draw weight of your bow. It is a basic analog bow scale that is easy to use and very accurate. The scale measures draw weights from 20-90lbs and saves the reading until it is re-zeroed. The spring may be stiff initially, but after a few good tugs, it will loosen up and provide an accurate weight that is simple to read. The Weston Bow Scale is a great option for those looking for an affordable and reliable tool to fine-tune their archery skills.
| Characteristics | Values |
|---|---|
| Ease of use | Easy to use |
| Accuracy | Accurate, Inaccurate |
| Adjustability | Adjustable |
| Quality | Good, Poor |
| Readability | Difficult to read |
What You'll Learn
How to use the Weston Bow Scale to measure draw weight
The Weston Bow Scale is a simple and effective tool for measuring the draw weight of your bow. Here's a step-by-step guide on how to use it:
Before You Begin:
Before using the Weston Bow Scale, it is important to ensure that the spring is not too stiff. When you first purchase the scale, the spring may be a little rigid and require a few good tugs to loosen up. This is normal and can be easily adjusted. Give the spring a few good pulls to release the tension and ensure smooth operation during your measurements.
Step-by-Step Guide:
- Slide the scale indicator back to the starting position: Before taking any measurements, ensure that the indicator on the side of the scale is at the zero position. This will provide an accurate measurement of the draw weight.
- Place your fingers on the scale finger rests: The Weston Bow Scale has two finger rests that form a small T-shape on the front. Place your index finger on the top rest and your middle finger on the bottom one, then wrap your thumb and other fingers around the tube for a comfortable grip. Make sure you hold the scale with the hand you usually draw your bow with (right hand if you're right-handed).
- Hook the scale around the arrow nook: At the end of the bow scale, you'll find a rounded hook. Loop this hook around the bowstring in the same place where you would normally nock an arrow. Ensure that the hook is secure and won't come loose during your draw.
- Hold the bow with your arm stretched out straight: Use your free arm to grab the bow handle and lift it into your normal shooting position. For most people, this means having your lead arm straight and in line with your elbow. Hold the scale as if it were an arrow, ready to be drawn.
- Pull the string back smoothly to your normal draw length: Draw the string as if you were getting ready to shoot an arrow, until you reach your usual draw length (usually around your ear). Hold this position for a few seconds to get a stable measurement. Do not release the scale at any point during this step.
- Release the tension smoothly: To let go of the tension, bring your drawing arm forward at a steady pace until there is no more tension on the string. Do not abruptly let go of the string or scale, as this could send the scale flying.
- Check the indicator line on the bow scale: The indicator on the scale will display the poundage of your draw weight. Note the number it's pointing to, and you've successfully measured your draw weight!
Additional Tips:
- Always ensure that the numbers on the scale are facing you, so your hand doesn't block the indicator during the measurement.
- For added safety, some professionals recommend nocking an arrow while measuring the poundage, mimicking your actual draw length. However, if you're not experienced with a bow scale, it's best to avoid this until you're comfortable with the process.
- You can confirm the accuracy of your measurement by taking 2-3 readings and checking for consistency.
The Weston Bow Scale is a straightforward and user-friendly tool for measuring draw weight. With its simple design and accuracy, it's a great choice for archers looking to fine-tune their equipment.
Setting a Nock Point: Bow Square Alternatives
You may want to see also
How to calibrate the Weston Bow Scale
Calibrating a Weston Bow Scale is a straightforward process. Firstly, it is important to note that the scale may be a little stiff when you first purchase it, so it is recommended to give the spring a few good tugs to loosen it up. After this initial 2-3 draw breaking-in period, the scale should show an accurate weight.
If you don't trust the weight, you can easily calibrate the scale by hanging a known weight off the end. For example, you can use free weights or dumbells to calibrate the scale. Simply secure a weight that approximates the centre line of the need for your use of the scale and calibrate it to that weight. You can get the weight calibrated on a certified scale, such as a meat-cutter's scale or at the post office.
It is also worth noting that some users have mentioned that the Weston Bow Scale can be adjusted by loosening the Allen screw and turning the black plastic cap at the top.
Perfecting the Art of Squaring Your Compound Bow
You may want to see also
How to adjust the Weston Bow Scale for accuracy
The Weston Bow Scale is a simple and easy-to-use device for measuring the draw weight of a bow. It is a mechanical scale, which is generally preferred by most people as they are easier to read and more accurate than their digital counterparts. The scale can measure draw weights from 20-90 lbs and saves the reading until it is reset.
When you first purchase the scale, the spring may be a little stiff and require a few good tugs to loosen up. After the initial 2-3 draws, the scale will show an accurate weight that is simple to read. If you don't trust the weight, it can be easily calibrated by hanging a known weight off the end.
- When you receive the Weston Bow Scale, inspect the item and ensure that all parts are present and in good condition.
- The spring may feel a little stiff at first. To loosen it up, give it a few good tugs.
- To test the accuracy of the scale, hang a known weight off the end. You can use free weights or a bucket of water with a known weight.
- Compare the reading on the scale to the known weight. If the reading is inaccurate, you may need to calibrate the scale.
- To calibrate the scale, loosen the Allen screw at the top of the scale with an Allen key.
- Turn the black plastic cap at the top of the scale to adjust the resistance on the spring. Turn it clockwise to increase the resistance and counter-clockwise to decrease it.
- Continue testing and adjusting the scale until you achieve the desired accuracy.
By following these steps, you can adjust your Weston Bow Scale for accuracy and ensure that you are getting precise measurements of your bow's draw weight.
The Ultimate Guide to Using the Mossy Oak Bow Square: Perfect Your Archery Form
You may want to see also
How to read the weight on the Weston Bow Scale
The Weston Bow Scale is a simple and easy-to-use device for measuring the weight of a bow. It is a basic analog bow scale that uses a simple design that can be figured out by almost anyone. The scale can measure draw weights from 20 to 90 lbs and saves the reading until it is re-zeroed.
When you first purchase the scale, the spring may be a little stiff and require a few good tugs to loosen up. After the initial 2-3 draws, the scale will show an accurate weight that is simple to read. If you don't trust the weight, it can be easily calibrated by hanging a known weight off the end.
- Attach the scale to your bow: The scale has a hook that can be easily attached to the D-loop of your bow. Ensure that the loop size is the same or larger than your bow's loop.
- Pull the scale back: Once the scale is attached, pull the scale back to your normal anchor point. If you are using an arrow, ensure that you pull the scale back an additional length to compensate for the arrow's position.
- Read the weight: After pulling the scale back, the needle on the analog gauge will point to a number indicating the weight in pounds (lbs). This weight represents the draw weight of your bow.
- Re-zero the scale: If desired, you can re-zero the scale by turning the black plastic cap at the top. This will reset the scale to zero, and you can take new measurements.
It is important to note that the Weston Bow Scale measures weight in pounds. If you prefer to work in other units, such as kilograms, you may need to convert the weight manually. Additionally, the scale has a minimum draw weight of 20 lbs, which may be a problem when measuring some compound bows.
The Weston Bow Scale is a reliable and accurate tool for measuring the weight of your bow. With its simple design and ease of use, it is a great choice for archers who want to fine-tune their equipment.
The Art of Gift Wrapping: Mastering the Bow-Tying Technique Around a Square Box
You may want to see also
How to attach the Weston Bow Scale to your bow
To attach the Weston Bow Scale to your bow, follow these steps:
- Place your middle and index fingers on the scale's finger rests. The scale should be held in the hand that you usually draw your bow with. Ensure that the numbers on the scale are facing you so that your hand does not block the indicator.
- Hook the scale around the arrow nook on the string. Test the attachment a few times by pulling the scale back slightly to ensure that the hook is secure.
- Hold the bow up with your arm stretched out straight, mimicking your normal shooting position. Ensure that you do not point the bow at any people or objects that could be damaged.
- Pull the string back smoothly until you reach your normal draw length. Continue until you reach a position near your ear and hold it there for a few seconds to take a measurement. Do not release the scale at any point; if you feel like you are losing your grip, slowly release the tension.
- Let the tension off the string smoothly by bringing your drawing arm forward at an even pace until there is no more tension on the string.
- Check the indicator line on the bow scale to measure the poundage of your draw.
The Weston Bow Scale is easy to attach and use, providing accurate measurements of your bow's draw weight.
Crafting a Classic: The Art of Creating a Bow Tie and Pocket Square
You may want to see also
Frequently asked questions
The Weston Bow Scale is very accurate and provides consistent readings. However, some users have reported discrepancies of a few pounds. It is recommended to calibrate the scale before use by hanging a known weight off the end.
The Weston Bow Scale is simple to use. You hook the scale onto your bow and pull back to your usual anchor point. It is important to use an arrow while taking the measurement to ensure consistent readings.
If your bow scale is providing inaccurate readings, it may need calibration. Most scales have a small screw at the bottom that allows for calibration. You can adjust the screw until the scale reads the correct weight.
Mechanical bow scales are typically more compact and lightweight, while electronic bow scales offer digital readouts and may have additional features such as saving the peak draw weight.
It is recommended to change the batteries in an electronic bow scale when you start experiencing problems with the readings. This will ensure the accuracy of the scale is maintained.
