Replacing Yamaha Boat Key Cover: A Step-By-Step Guide

If you're looking to replace the key cover on your Yamaha boat, you're in luck! This is a common issue, and there are a few solutions. First, it's important to identify which Yamaha key cover you need. Yamaha uses two sizes of protective covers: 15mm and 18mm. The 18mm cover is used for key number series 300 and 700, while the 15mm cover is used for key number series 400 and 800. Once you've identified the correct size, you can purchase a replacement cover online or from a Yamaha dealer. Some people have reported success finding replacement keys at websites like boats.net, or even getting them made at a locksmith for less than $5. With a new key cover in hand, simply snap it into place over the end of the switch, and you're done!

Yamaha 6K1-82532-00-00 Switch Panel Key Cover

The Yamaha 6K1-82532-00-00 Switch Panel Key Cover is a direct replacement for the key slot cover on a Yamaha boat ignition switch. It is made of soft rubber and fits perfectly over the ignition keyhole, keeping the key slot waterproof.

To replace the key cover on a Yamaha boat, you will first need to purchase a replacement key cover. You can find these online or at a Yamaha dealer. Once you have the new key cover, the process is straightforward:

• Remove the old key cover: Gently but firmly pull the old key cover off the ignition switch. It should come off with a small amount of force.
• Clean the area: Before installing the new key cover, ensure the area is clean and free of any dirt or debris.
• Install the new key cover: Take the new Yamaha 6K1-82532-00-00 Switch Panel Key Cover and snap it into place over the ignition keyhole. It should fit snugly and securely.
• Test the ignition: Once the new key cover is installed, test the ignition by inserting the key and starting the boat as normal. Ensure the key cover is secure and that the key fits smoothly into the keyhole.

The Yamaha 6K1-82532-00-00 Switch Panel Key Cover is a simple and direct replacement that can help keep your Yamaha boat ignition switch waterproof and in good condition. It is always a good idea to address any wear and tear on your boat promptly to maintain its performance and longevity.

Yamaha 703-KEYCA-PS-00 Cap

The Yamaha 703-KEYCA-PS-00 Cap is a genuine Yamaha part designed to fit your specific vehicle. It is a replacement key cap for Yamaha outboard marine engines, including the 300 and 700 series. This product has received positive reviews for its fit, ease of installation, and performance, with some customers noting that it fits perfectly over the ignition keyhole and keeps the key slot waterproof.

The Yamaha 703-KEYCA-PS-00 Cap has dimensions of 4.33 x 3.46 x 0.91 inches, or 11.91 x 8.31 x 2.79 cm, and weighs 9 g. It is available for purchase through various online retailers, including Amazon and Central Texas Powersports.

To replace the key cover on your Yamaha boat, you can follow these general steps:

• Purchase the correct replacement key cover, ensuring it is compatible with your Yamaha model.
• Locate the ignition keyhole on your Yamaha boat.
• Remove any remaining parts of the old key cover from the ignition keyhole. This may involve gently prying or unscrewing any remnants.
• Clean the area around the ignition keyhole to ensure that the new key cover adheres properly.
• Take the new Yamaha 703-KEYCA-PS-00 Cap and align it with the ignition keyhole.
• Snap the new key cover into place, ensuring it is securely fitted.
• Test the key to ensure it fits properly into the keyhole and that the cover does not obstruct the key's function.

Note: These steps are general guidelines, and specific instructions may vary depending on your Yamaha model. Always refer to the owner's manual or seek guidance from a qualified technician if you are unsure about the replacement process.

Additionally, proper care and maintenance of your Yamaha boat key and cover can help extend their lifespan. Here are some tips:

• Regularly clean and inspect your boat key and cover to remove any dirt, debris, or corrosion.
• Ensure the key cover is securely attached to the key when not in use.
• Store the key in a safe and dry place when not in use to prevent loss or damage.
• Consider using a floating key chain or lanyard to avoid losing the key in the water during boat operations.
• Periodically check the key for any signs of wear or damage, and replace it if necessary.

By following these maintenance tips and promptly replacing the key cover when needed, you can help ensure the longevity and proper function of your Yamaha boat key.

Yamaha Outboard Replacement Engine Stop Lanyard

The Yamaha Outboard Replacement Engine Stop Lanyard is a crucial safety feature for any boat or personal watercraft. It is designed to be attached to the driver, so if they fall out of the vehicle, the lanyard will pull out the kill switch key, stopping the engine. This prevents runaway vehicles and potential accidents.

Where to Buy

The Yamaha Outboard Replacement Engine Stop Lanyard can be purchased from various online retailers, including Amazon, where it has received positive reviews for its performance, quality, fit, and value for money.

Installation and Compatibility

The installation process for the lanyard is straightforward, with some customers receiving their product and installing it on their watercraft the very next day. It is compatible with Yamaha watercraft and motors, and the lanyard is 60" long when uncoiled, with a clip at one end for attaching to the driver and a kill switch key at the other.

Reviews and Feedback

The Yamaha Outboard Replacement Engine Stop Lanyard has received positive reviews, with customers praising its performance and quality. Some reviews mention that it works perfectly as a replacement for their original lanyard, and it is described as being well-made and a genuine Yamaha product. The lanyard is also praised for its fit, with customers stating that it fits their Yamaha kill switch perfectly.

Similar Products

There are similar products available from other brands, such as DTLgear, which offers a 60" outboard kill switch lanyard with a Yamaha key. This product has also received positive reviews for its quality and performance, with customers stating that it works just like the original Yamaha lanyard.

The Yamaha Outboard Replacement Engine Stop Lanyard is a crucial safety feature for any Yamaha boat or personal watercraft owner. Its positive reviews and endorsements from customers make it a reliable choice for those seeking a well-made and functional lanyard.

Yamaha Outboard Marine Blue Floating Key Chain

The Yamaha Outboard Marine Blue Floating Key Chain is a bright and functional accessory for anyone who carries their keys near water. The key chain is made of durable soft foam, covered in vinyl, and features a white Yamaha logo. It can hold up to four keys and will float in the water, making it a useful purchase for boat owners.

The product has received positive reviews, with customers commenting on its functionality, durability, and bright colour. It is a genuine Yamaha product, not an aftermarket item, and fits keys for Yamaha outboard marine engines.

The key chain is available from a variety of sellers, including Amazon, where it has been rated 4.6 out of 5 stars from 137 ratings. It is also available from specialist retailers such as World of Powersports and pwcparts.com.

The Yamaha Outboard Marine Blue Floating Key Chain is a great purchase for anyone who wants to keep their keys safe and easily accessible while on the water.

Yamaha 90890-56021-00 0/M Key

The Yamaha 90890-56021-00 0/M Key is a replacement key for Yamaha outboard marine models. It is compatible with the Yamaha 700 series outboard models.

To replace your Yamaha boat key cover, you will need to purchase a new key cover that is compatible with your specific Yamaha model. The key cover is responsible for keeping the key slot waterproof and protecting it from the elements. Once you have purchased the correct replacement key cover, follow these steps:

• Remove the old key cover: Gently pry or pull off the old key cover from the ignition key hole. Be careful not to scratch or damage the surrounding area.
• Clean the area: Use a soft cloth to wipe away any dirt or debris from the ignition key hole and the surrounding area. Ensure that the surface is clean and dry before installing the new key cover.
• Install the new key cover: Align the new key cover with the ignition key hole and gently snap it into place. Ensure that it is securely fitted and seated properly.

It is recommended to refer to the Yamaha owner's manual or seek assistance from a certified Yamaha dealer or marine technician if you are unsure about the replacement process or if you encounter any difficulties.

Additionally, it is always a good idea to have a spare key cover on hand in case of future damage or loss. The Yamaha 90890-56021-00 0/M Key is available for purchase online and can be ordered directly from Yamaha or through authorized dealers. When ordering, ensure that you are selecting the correct part number specific to your Yamaha model.

Frequently asked questions